Solubility of boron and carbon in γ-iron of Fe-B-C alloys

Анотація

It is known that solubility of elements affects the phase composition of alloys that are formed in the solidification process. To predict the phase composition of alloys, it is necessary to determine the solubility limit in the phases. In the paper the structural properties of austenite of alloys in the system of Fe-B-C are studied and the solubility limit of boron and carbon is determined. The investigation is carried out for the specimens with carbon content of 0.0001–2.3 wt.% and boron content of 0.0001–1.0 wt.%, the rest is iron. To determine the physical properties of alloys, we use the microstructure analysis, X-ray microanalysis, X-ray structure analysis and differential thermal analysis. It is shown experimentally that the maximum shift of the eutectoid point is observed when boron content is up to 0.004 wt.%. When boron content of the alloy increases to 0.01 wt.%, the eutectoid point shifts to the left to 0.21 wt.%-carbon and the austenite area decreases. Further increase in the numerical value of boron content in the alloy is hardly caused the eutectoid point to shift. In this paper, the vertical section of the Fe-B-C system state diagram is obtained from experimental data.

For the first time we obtain temperature dependence of the free energy of γ-iron solid solution, using the quasi-chemical method, and determine the solubility limit of carbon and boron. The maximum weight fraction of boron in the austenite can be up to 0.0136 wt.%, and that for carbon – up to 1.12 wt.%.